描述
生产工艺
机箱配置
8吨随车起重机采用随车起重机专用底盘，玉柴180马力发动机，国V排放标准，陕西齿轮8速高低档变速箱。
300mm三层直通梁，前桥5.5吨，后桥11.5吨，整车10.00钢丝轮胎，轴距5100mm，货箱标准可5.8米、6.1米，可选手动伸缩或液压伸缩，带定向助力，原装取力器，行车记录仪，遥控油门，下保护，ABS防抱死制动系统，空气切断制动系统
起重机配置
8吨随车起重机可配备6.3吨、8吨、10吨起重机，360度全旋转作业。标配前液压支腿，可加装液压后支腿和高空座椅。
6.3吨随车起重机四节臂工作半径为11.5米，起升高度为12.8米，非伸臂长度为4.2米，全伸臂长度为11米。
水平起重参数为：动臂延伸11米，可起重600kg。10米起重能力为1000kg，7.19米起重能力为1600kg，4.37米起重能力为2600kg，2.5米起重能力为6300kg。
8吨四臂随车起重机的工作半径为13.5米，起升高度为15.5米，未伸展臂长为5.4米，完全伸臂长度为13.5米。
水平方向起重参数为：臂架延伸13.5米500kg，11.5米延伸1100kg，7米延伸2500kg，2.5米延伸8000kg。
产品优势
1、8吨随车起重机采用专用底盘，四点悬挂驾驶室，300mm三层架
2、东风8吨随车起重机采用六角臂技术，中性好，截面抗弯能力强;
3、起重机结构紧凑，设计合理，占用空间小;
4、独特的浮动三点桥结构设计，有效降低车辆行驶时底盘梁的额外应力;
5、标配防翻滚报警装置，防止钢丝绳过翻损坏，确保作安全。
The new 8-ton truck-mounted crane has a cargo box that can reach 6.5 meters.
The 8-ton truck-mounted crane chassis supports optional “Dongfeng, SAIC, SINOTRUK, Isuzu” and is equipped with a Yuchai 180-horsepower engine with a relatively low speed compared to Cummins.
Suitable for climbing and walking on mountain roads, Shaanxi gear 8-speed gearbox, reasonable gear distribution, flexible shifting, front axle 5.5 tons, rear axle 11.5 tons, whole vehicle 10.00 steel wire tires, with ABS, directional power assist, air-cut braking system ,
The upper loading container can be 6.5 meters long. The girder uses a 300mm double-layered and partially three-layered reinforced special girder. Its load-bearing capacity and compression resistance are stronger than ordinary girders. The position of the partial three-layered girder is specially used to install the crane. , which can effectively prevent the beam from deforming when the crane is lifting.
Dongfeng chassis is generally equipped with a 5-ton, 6.3-ton or 8-ton truck-mounted crane with 360-degree full rotation operation. The picture on the left shows an 8-ton XCMG truck-mounted crane with 360-degree full rotation.
Outrigger span is 2280-5580 (kg)
The high-altitude seat is an additional part of the truck-mounted crane. Generally, the operation of the truck-mounted crane is performed on the ground and can be operated from both left and right sides. Such operation will create a blind spot in the viewing angle, making it impossible to see the environmental conditions on the other side. With the addition of a high-altitude seat, high-altitude operations have a wider and clearer field of vision, which reduces blind spots in the viewing angle. You can gain insight into the surrounding lifting conditions at any time, and your work efficiency will be higher.
The product supports customization. For more sizes, please contact your local dealer or salesperson for detailed information.
评价
目前还没有评价